|
Grip
Glazed single-fired tiles, frost resistant (white body), anti-slip surface for wet areas (R11 B)
|
| Grip - colours - sizes - suggested uses |
| |
| suggested uses |
| |
DIN S1130
non-skid characteristics |
Determination of the anti-slip characteristics: |
R9
normal adhesion
α=min. 6 °/max 10° |
R10
medium adhesion
α=min 10°/max 19° |
R11
high adhesion
α=min 19°/max 27° |
α=inclination angle |
Vogue results |
R11 |
DIN 51097
inclination angle |
Determination of the anti-slip characteristics for barefoot wet areas: |
A
medium adhesion
α=min 12°/max 17,9° |
B
high adhesion
α=min 18°/max 23,9° |
C
strong adhesion
a = min. 23,9° |
α=inclination angle |
Vogue results |
B |
B.C.R.A.
method |
Coefficient of friction:
1. dry (leather)
2. wet (Rubber) |
μ ≤ 0,19
dangerous slipperiness |
0,20 ≤ μ ≤ 0,39
extreme slipperiness |
0,40 ≤ μ ≤ 0,74
satisfactory
friction |
μ ≥ 0,75
excellent friction |
Vogue results |
1=μ>0,78
2=μ>0,58 |
|
|
Grip
P.E.I. 4 |
  |
| Interior and exterior, floors (R11 B). Moderate commercial use (wet areas). Examples: bare-foot
areas (showers, swimming-pools floors i.e. basin) in which anti-slip material is required. |
|
Grip
P.E.I. 3 |
 |
| Interior and exterior, floors (R11 B). Light commercial use (wet areas). Examples: bare-foot areas
(showers, swimming-pools floors i.e. basin) in which anti-slip material is required. |
|
Grip
P.E.I. 2 |
 |
| Interior and exterior, floors (R11 B). Light commercial use (wet areas). Examples: bare-foot areas
(showers, swimming-pools floors i.e. basin) in which anti-slip material is required. |
|
Grip
P.E.I. 1 |
 |
| Interior and exterior, floors (R11 B). Light commercial use (wet areas). Examples: bare-foot areas
(showers, swimming-pools floors i.e. basin) in which anti-slip material is required. |
|
|
| Piatto Doccia R10 A-B |
| |
DIN S1130
non-skid characteristics |
Determination of the anti-slip characteristics: |
R9
normal adhesion
α=min. 6 °/max 10° |
R10
medium adhesion
α=min 10°/max 19° |
R11
high adhesion
α=min 19°/max 27° |
α=inclination angle |
Vogue results |
R10 |
DIN 51097
inclination angle |
Determination of the anti-slip characteristics for barefoot wet areas: |
A
medium adhesion
α=min 12°/max 17,9° |
B
high adhesion
α=min 18°/max 23,9° |
C
strong adhesion
a = min. 23,9° |
α=inclination angle |
Vogue results |
A-B |
B.C.R.A.
metodo |
Coefficiente di attrito:
1. asciutto (cuoio)
2. bagnato (gomma) |
μ ≤ 0,19
dangerous slipperiness |
0,20 ≤ μ ≤ 0,39
extreme slipperiness |
0,40 ≤ μ ≤ 0,74
satisfactory
friction |
μ ≥ 0,75
excellent friction |
Vogue results |
1=μ>0,48
2=μ>0,42 |
|
Piatto Doccia R10 A-B
P.E.I. 4, 3, 2 |
|
| Interior and exterior, floors (R10 A-B). Moderate commercial and residential use. Examples: dry/
damp areas where the use of anti-slip materials is necessary. |
|
See the general technical chart for further details.
Laying advice: To obtain a proper result, the material must be fixed with a joint of at least 2 mm. Pay the greatest attention to the instructions for use
provided by the grouting material suppliers and ensure that it can be cleaned from each individual tile before proceeding.
Maintenance: Do not use acid cleaning materials. Avoid using wax based cleaning products. |
|
| |
| Grip - colours - sizes - suggested uses |
|
